pH Electrode with Clogging Prevention System (CPS™) and quick connect DIN Connector - FC10483
The FC10483 is a glass body, refillable, open junction pH electrode with a quick connect DIN connector that is supplied with the HI99111. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS™) technology and spherical glass sensing bulb made with general purpose glass.
This pH electrode is ideal for wine must and juice due to their high solids content that would clog a standard general purpose pH electrode. The FC10483 is a pre-amplified electrode that has a built-in temperature sensor for temperature compensated measurements in a single probe design.
- Clogging Prevention System (CPS™) Technology
- Built-In Temperature Sensor
- Double Junction Design
Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.
The FC10483 uses general purpose (GP) glass, spherical bulb, glass body, sleeve junction with CPS technology, double junction and is refillable with 3.5M KCl making it ideal for wine must, juice, and other samples with a high solids content.
General Purpose Glass Formulation
General purpose glass as the name implies is a standard glass formulation that is used for general use. A pH electrode with general purpose (GP) glass will have a resistance of 100 megaohms at 25°C and is suited for measuring pH of samples that are at ambient temperatures. The FC10483 is suitable to use with samples that measure from 0 to 80°C.
Spherical Glass Tip
The spherical shaped tip design allows for a wide area of contact with the measured sample. This permits a faster electrode response with a higher degree of stability.
CPS Sleeve Junction
Clogging Prevention System (CPS™) technology is an innovation for the improvement of pH measurements in samples that have a high solids content. Conventional pH electrodes use ceramic junctions that can clog quickly when used in samples that have a high solids content such as wine must or juice. When the junction is clogged, the electrode does not function. The CPS technology utilizes the porousness of ground glass coupled with a PTFE sleeve to prevent clogging of the junction. The ground glass allows proper flow of the liquid, while the PTFE sleeve repels solids. As a result, pH electrodes with CPS technology take up to 20 times longer to be fouled as compared to conventional electrodes.
Double Junction Reference
A double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the electrolyte of the internal compartment, which houses the Ag/AgCl reference wire; the electrolyte outside this compartment is silver free. The double junction design means that virtually no silver from the electrode enters the sample. This design allows measurement in applications where silver ions in the sample are undesirable or for samples that contains sulfides that can cause the silver to precipitate and clog the junction. Clogging of the junction will result in drifty and erratic readings.
The FC10483 is a refillable probe. Since it is a double junction pH electrode the fill solution is the HI7082 3.5M KCl. This solution does not contain any silver as with single junction electrode.
Glass Electrode Body
The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allow for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.
TThe FC1048 has a quick connect DIN connector. This type of connector is proprietary to the meter it is to be used with. The FC10483 is the replacement electrode for the HI99111. Other type of connectors include BNC, screw type, T-type, and 3.5mm.
|Product Name||pH Electrode with Clogging Prevention System (CPS™) and quick connect DIN Connector - FC10483|
|Reference Cell Type||double, Ag/AgCl|
|Junction Type/Flow Rate||open with ground glass and moveable sleeve, CPS technology|
|Refill Electrolyte||3.5M KCl|
|Tip / Shape||dome (dia|
|Max. Pressure||0.1 bar|
|Temperature Operating Range||0 to 80°C (32 to 176°F) - GP|
|Body Length/Overall Length||120 mm / 175.5 mm|
|Outer Diameter||12 mm|
|Cable||7-pole; 1 m (3.3')|
|Connector Type||quick connect DIN|
|Recommended Use||juice, must, wine|