Sulfite Chemical Test Kit - HI3822
The HI3822 is a chemical test kit that uses a titrimetric method to measure sulfite as sodium sulfite (Na2SO3). The HI3822 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with starch indicator
All required materials are included with the test kit, such as the sample beakers, indicator and reagent bottles, and calibrated syringe.
Readings from 0 to 20 mg/L are determined to 0.2 mg/L resolution.
Readings from 0 to 200 mg/L are determined to 2 mg/L resolution.
Replacement reagents available
There is no need to buy a new kit when reagents are exhausted. The HI3822-100 can be ordered to replace the reagents supplied with the kit.
Significance of Use
There are many reasons to monitor the concentration of sulfite in water. In boiler feed and effluent waters, a sulfite concentration of approximately 20 mg/L must be maintained to prevent pitting and oxidation of metal components. A high level of sulfite results in a lowered pH, thus promoting corrosion. The monitoring of sulfite is important in environmental control as well. Sulfite ions are toxic to aquatic lifeforms; the chemical demand that sulfide produces on oxygen in water can destroy the delicate ecological balance of lakes, rivers and ponds.
|Product Name||Sulfite Chemical Test Kit - HI3822|
|Dangerous Good||This product is considered hazardous to ship and is subject to extra handling fees.|
|Sulfite Measurement Type||titration|
|Sulfite Range||0 to 20 mg/L Na₂SO₃; 0 to 200 mg/L Na₂SO₃|
|Sulfite Resolution||0.2 mg/L (0 to 20 mg/L range); 2 mg/L (0 to 200 mg/L range)|
|Sulfite Number of Tests||110|
|Weight||910 g (34.0 oz.)|
|Dimensions||260x120x60 mm (10.2x4.7x2.4")|
|Ordering Information||HI3822 test kit comes with 30 mL sulfamic acid solution, 30 mL EDTA reagent, 15 mL sulfuric acid solution, 10 mL starch indicator, 120 mL titrant solution, 20 mL calibrated vessel, 50 mL calibrated vessel, and calibrated syringe with tip.|
Automatic Potentiometric Titrator - HI932As low as CA$10,850.00