Boron Chemical Test Kit for Irrigation Water - HI38074

SKU: HI38074

Ships within 5-10 Business Days
This product is considered hazardous to ship and is subject to extra handling fees.
This product is freeze sensitive and is subject to extra handling fees from November 15th to April 15th.

The HI38074 is a chemical test kit that measures boron in irrigation water by titration with boric acid. The HI38074 is supplied complete with all of the reagents and equipment necessary to perform 100 tests.

  • Pre-made reagents for ease of use
  • All reagents marked with expiration date and lot number for traceability
  • Manual titration performed with electronic pH meter

The HI38074 is a titration-based chemical test kit that determines the boron concentration in irrigation water within a 0 to 5 mg/L (ppm) range. The HI38074 is supplied with all of the necessary reagents and equipment to perform the analysis, including the HI98103 Checker pH meter. The HI98103 Checker pH meter is used for sample preparation and for the determination of the pH titration endpoint. The HI38074 contains enough reagents for perform 100 tests.

Features at-a-glance

  • Complete setup

    • All required materials are included with the test kit, such as the sample beaker, plastic pipettes, pH adjustment reagents, and pocket pH meter.

  • High resolution

    • Readings from 0 to 5 mg/L are determined to 0.2 mg/L resolution.

  • Replacement reagents available

    • There is no need to buy a new kit when reagents are exhausted. The HI38074-100 reagent set can be ordered to replace the reagents supplied with the kit. This reagent set comes with 1 (30mL) dropper bottle of HI38074A-0, 1 (30mL) dropper bottle of HI38074B-0, 1 (100mL) bottle of HI38074C-0, 100 packets of mannitol powder, and 1 (100mL) bottle of HI38074E-0.

Significance of Use

Boron is one of the micronutrients essential for plant growth. It may be present naturally in water, or it may find its way into a watercourse through industrial waste effluents. Boron in excess of 2.0 mg/L in irrigation water can be detrimental to plant growth, and some plants may even be adversely affected by concentrations lower than 1.0 mg/L.

The United States Department of Agriculture (USDA) reports the following classification:

Boron (ppm)

Effect on crops

< 0.5  

good (except for very sensitive crops)

0.5 to 2.0

some risks (many crops must be excluded)

> 2.0     

dangerous (may only be used for very tolerant crops)

More Information
SKU HI38074
Product Name Boron Chemical Test Kit for Irrigation Water - HI38074
Quote Required No
Dangerous Good This product is considered hazardous to ship and is subject to extra handling fees.
Boron Measurement Type titration
Boron Range 0.0 to 5.0 mg/L
Boron Resolution 0.2 mg/L
Boron Method boric acid
Boron Number of Tests 100
Weight 780 g (27.5 oz.)
Dimensions 235x175x115 mm (9.2x6.9x4.5")
Ordering Information HI38074 test kit comes with reagents for 100 tests, HI98103 Checker pH meter, pH 4.01 sachet (1), pH 7.01 sachet (1), screwdriver, 120 mL bottle with cap, 50 mL calibrated vessel, and 1 mL plastic pipettes (2).
Write Your Own Review
You're reviewing:Boron Chemical Test Kit for Irrigation Water - HI38074
Your Rating