Checktemp® 4 Folding Thermometer - HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 °C (572 °F). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3') in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79") thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 oC) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester - HI151
|Product Name||Checktemp® 4 Folding Thermometer - HI151|
|Thermistor Temperature Range||-50.0 to 300 °C / -58.0 to 572 °F|
|Thermistor Temperature Resolution||0.1 °C (-50.0 to 199.9 °C); 1 °C (200 to 300 °C)
0.1 °F (-58.0 to 199.9 °F); 1 °F (200 to 572 °F)
|Thermistor Temperature Accuracy||± 0.2 °C (-30.0 to 170.0 °C); ± 0.4 °C (-50.0 to -30.0 °C and 170.0 to 199.9 °C); ± 1 °C (200 to 300 °C) ± 1 digit
±0.4 °F (-22.0 to 199.9 °F); ±0.8 °F (-58.0 to -22.0 °F);
±1 °F (200 to 392 °F); ±2 °F (392 to 572 °F) ± 1 digit
|Automatic Shut-Off||power save settings|
|Battery Type/Life||CR2032 3V x 2 pcs. / approx. 4000 hours of use|
|Environment||-20.0 to 50.0 ºC (-4.0 to 122.0 ºF)|
|Dimensions||165 x 45 x 24 mm (6.5 x 1.8 x 0.9”)|
|Weight||85 g (3.0 oz)|
|Ordering Information||HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.|